LEDC demo

Demo file : esp32_ledc_demo.slx


This demo uses LEDC Block to configure four LEDs to repeat four sequences.

Hardware Setup

  1. ESP32 module
  2. 4 LEDs
  3. 4 Resistors (1k ohm)

What should be happening?

The four LEDs will follow the four sequences below.
  1. Gradually increase the intensity to LED ON state
  2. Gradually decrease the intensity to LED off state.
  3. Quick change to On state.
  4. Quick change to OFF state.

Previous : Circular Buffer demo
Next : Automatic Logging of data to Google sheets from ESP32

Also available in: PDF HTML TXT