Forums » Req. WJ2(Zynq-7000) support »
Typo's in the explanation of gpio_demo3
Added by Johan Henning over 1 year ago
This example has been tried and tested using ... -> This example has been tested using ...
Name the buttons, slider switches and leds as they are shown on the board
Pin 58 us connected to a -> Pin 58 is connected to a
use "shall" instead of "would" (shall blink)
Why make the model more complicated then necessary by using the LED pattern subsystem and the switches? An 3 input AND port per input pin and connected to a limited counter and the push button gives the same result. See attached model.
Replies (1)
RE: Typo's in the explanation of gpio_demo3
-
Added by Chandima Jayaneththi (จันทิมา) over 1 year ago
Hi Johan,
Thank you for the feedback. We will fix those typos and we will add a simple digital input demo in the coming release