Project

General

Profile

Forums » Req. WJ2(ESP32) support »

BUG: Timing deviation when running on target

Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Hello,
When pulsing two different output pins, every 5 seconds with a requested pulse length of 2ms, you get one pulse of approx. 2ms and the other pulse is always 3ms.
The two pulses are shifted 2500ms, so they may not interfere each other.
See for the details the attached screenshots and included model.
The esp32 is configured for external mode, station mode, Wifi ssid is set to AIMAGIN and Wifi password to WAIJUNG2ESP32.
Hopefully you can fix this problem.
Best regards,

Martin.

Capture_01_timing_deviation.JPG View Capture_01_timing_deviation.JPG 296 KB
Capture_03_timing_deviation.JPG View Capture_03_timing_deviation.JPG 250 KB
Capture_04_timing_deviation.JPG View Capture_04_timing_deviation.JPG 187 KB
Capture_02_timing_deviation.JPG View Capture_02_timing_deviation.JPG 276 KB
esp32_ext_mode.slx esp32_ext_mode.slx 43.3 KB

Replies (2)

RE: BUG: Timing deviation when running on target - Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

You can forget this issue, the problem is in the model itself.
When running the offline simulation, I get the same result.
Sorry for the inconvenience.
Best regards,

Martin.

RE: BUG: Timing deviation when running on target - Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Hi Martin, no problems at all. We are here to do our best to help, let me know if there's something we can do.

--
Parth Maheshwari
Application Engineer

    (1-2/2)