Project

General

Profile

Digital output block shows PIN 34, but this is a input only pin

Added by martin van beek over 3 years ago

Hello,
I found a small bug within the Digital Output Block configuration panel.
Here you can select GPIO34 as an output pin, but this is an Input only pin by design.
Best regards,

Martin.


Replies (5)

RE: Digital output block shows PIN 34, but this is a input only pin - Added by Dhanika Mahipala (ดานิก้า) over 3 years ago

Thank you for the feedback. Waijung2 block-set is designed for the common ESP32 MCU family. Some MCU modules support both input and output configuration for PIN34. Please refer the Espressif documentation for more details.

RE: Digital output block shows PIN 34, but this is a input only pin - Added by martin van beek over 3 years ago

Thanks for your quick response.
That's great, I didn't know the ESP32-S2.
But then you can say, the selection fields for the GPIO35 ... 43 are missing in your current configuration screen.
Best regards,

Martin.

RE: Digital output block shows PIN 34, but this is a input only pin - Added by Dhanika Mahipala (ดานิก้า) over 3 years ago

Thank you for the reply. We looked into the matter and you are right. During the early stages of Waijung2 development the ESP32-S2 MCU was not available thus the confusion regarding the GPIO pins. We will fix this bug in a future release.

RE: Digital output block shows PIN 34, but this is a input only pin - Added by martin van beek over 3 years ago

Thanks for your quick response.
The missing pins are available now, really optimistic with 45 GPIO pins ;o)))
Best regards,

Martin.

RE: Digital output block shows PIN 34, but this is a input only pin - Added by Dhanika Mahipala (ดานิก้า) over 3 years ago

You are welcome. We value your feedback very much as it helps improve our product. Please don't hesitate to contact us if you need any further assistance or if there are any suggestions for the future releases.

Best Regards,
Dhanika

    (1-5/5)