Smart Sensor update gateway sensor software¶

Note: Please note software upgrade is only available via android mobile phone

Step 1:

Please download the apk file below (amg_ble_upgrade_ble4.2_v2.0.apk), this is the application used for software upgrade (works with android phones)
Please download the bin file below (if need to upgrade gateway download amg_gateway3_emacs_wifi_iap.bin).

Step 2

Please copy these files to your android mobile phone

Step 3

Please go to the location of amg_ble_upgrade_ble4.2_v2.0.apk file in your mobile phone and click on it to install the application.
Note: Please click allow as necessary, to accept all permissions if needed by the installation process

Step 4

After installed successfully, please open the application aMG BLE Upgrade,

Step 5

After the application is opened, please click on connect as shown below!f1e.PNG!

Next select the appropriate device you want to upgrade firmware (if gateway please select amg_gateway3 or if sensor please select correct sensor based on uid)

Step 6

Please confirm that you have connected to the correct device by the text shown

Step 7

Please click on the upgrade button on the bottom right corner.
Next browse to the location of the .bin file of the device you need to upgrade and click it

Step 8

Now device will begin updating, Status will be shown as percentage,

Step 9