Project

General

Profile

I have problem with calculation of execution time

Added by nabil kolta about 3 years ago

I tried to use the waijung profile to calculate the execution time, but I got this error:

Start Profiler, waiting for/acquiring data...
Profiler data recording complete.
Undefined function or variable 'genstm32f4crc32'.

Error in waijungc_profiler/makeReport

Error in waijung_profileviewerui

Error in gui_mainfcn (line 95)
feval(varargin{:});

Error in waijung_profileviewerui

Error in
matlab.graphics.internal.figfile.FigFile/read>@(hObject,eventdata)waijung_profileviewerui('butStart_Callback',hObject,eventdata,guidata(hObject))
Error while evaluating UIControl Callback.

how can I solve the above error?


Replies (4)

RE: I have problem with calculation of execution time - Added by Krisada Sangpetchsong (เอม) about 3 years ago

Thank you for your post. Unfortunately, Waijung 1 support may be very slow at this time.

We have moved our focus to Waijung 2 for IoT platform at the present.

RE: I have problem with calculation of execution time - Added by nabil kolta about 3 years ago

Thanks for your reply

Is there any similar tool like the waijung profiler on Waijung 2?

RE: I have problem with calculation of execution time - Added by Krisada Sangpetchsong (เอม) about 3 years ago

Hi

Not yet.

It has been a long time since we developed Waijung 1 but one solution we did investigated was toggling output pin for each step of interests.

Then you can use an oscilloscope to measure processing time of each block / set of blocks.

I am not sure if we actually made such block available. I remembered we did something like that and it seems to work.

RE: I have problem with calculation of execution time - Added by nabil kolta about 3 years ago

Thanks, I followed your advice and solved the problem of execution time.
Now, I am working to implement my trained model, but I did not find any block on your blockset to load my trained model and predict data.
Can you help me to solve this problem.

thanks !

    (1-4/4)