Project

General

Profile

Forums » Req. WJ2(ESP32) support »

An error occurred in Auto compile and download process. Please refer the log data above.

Added by Ayoub Ezzine over 3 years ago

Hello,
i m trying to create a simple LED Control circuit for STM32L476 using waijong 2 as attached.
But after building in Simulink, i receive the attached error.

Thank you for your Help

Ayoub

error.JPG View error.JPG 46.4 KB the circuit in Simulink
error2.JPG View error2.JPG 134 KB The error message

Replies (2)

RE: An error occurred in Auto compile and download process. Please refer the log data above. - Added by Krisada Sangpetchsong (เอม) over 3 years ago

Hi Ayoub

Thank you for your interests in using Waijung.

1) You should use Waijung 1 for STM32 MCU.
2) However, currently, Waijung 1 does not support STM32L476.
3) Waijung 2 ESP32 target is also very powerful too. If you can share your intened application, we may be able to suggest if Waijung 2 can be your solution.

RE: An error occurred in Auto compile and download process. Please refer the log data above. - Added by Ayoub Ezzine over 3 years ago

Hi Krisada,

Thank you for your quik respond to my message.

i want to use waijong 2 with the STM32L476 to controll a 12V DC Motor, but first i used it for a little application, like controlling the User-LED of the STM32L476 with a pulse generator in Simulink. But i only recieve the Error that i attached in my first question.

    (1-2/2)