Project

General

Profile

Forums » Req. WJ2(ESP32) support »

Bug: Some input / output pins are grayed out and can't be selected

Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hello,
When the esp32 devkit from Espressif is selected, there are some i/o pins missing on the digital input + output blocks.
The are grayed out and some enabled, but there is no support for that specific pins.
See the picture attached, I've marked the incorrect pins with a red cross.
For the input block there are issues with pins 16, 17, 20, 37 and 38.
For the output block the pins are 16, 17, and 20.
Hopefully you can solve this problem with the next release, that should be great.
Best regards,

Martin.

Capture_20_wrong_input_output_pin_definition.JPG View Capture_20_wrong_input_output_pin_definition.JPG 268 KB
esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf View esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf 948 KB

Replies (6)

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Martin, thank you for reaching out. We are currently working on both your queries and will keep you updated.

--

Parth Maheshwari
Application Engineer

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Martin,

To help you with this, we can give a option to enable all available gpio pins according to the family(ESP32, ESP32S2, ESP32S3 or ESPC3). But we can't disable the selected pins according to the development board because it is not possible to detect the development board that you are using. Let me know opinion.

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Chandima,
That's a great solution.
Unlock all available input/output pins, then the user can decide which pins are needed for the job.
Thanks for your quick response.
Best regards,

Martin.

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Chandima and Parth,
I followed the instructions to install the "digital in/out" and "uart" patch files.
But after opening Simulink with the related project file, nothing changed, the necessary pins are still grayed out.
See for the details the attached pictures.
Look forward to your quick response, best regards,

Martin.

Capture_41_patches_not_working_digital_out.JPG View Capture_41_patches_not_working_digital_out.JPG 265 KB
Capture_40_patches_not_working.JPG View Capture_40_patches_not_working.JPG 250 KB

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Martin, please enable "override pin selection constraints" to use the remaining pins: View
Let us know if you encounter any problems.

--

Parth Maheshwari
Application Engineer

override_pin_mask.png View override_pin_mask.png 47.2 KB

RE: Bug: Some input / output pins are grayed out and can't be selected - Added by Yuttakorn Kaewsuay (รัน) over 1 year ago

Hi Parth,
I overlooked the instruction to select the tickbox "override pin selection constraints".
But when selecting this function, the grayed-out pins turns on, and my application start functioning as intended.
Thanks for this quick fix, best regards,

Martin.

    (1-6/6)