Hi - I am using esp32c3 and I have couple of problems with monitoring. Mostly Wifi server does not grant IP by DHCP during connections. Rare the server on esp32 can be pinged . And when I manage to join its break the connection.
Log:
Parameter precision loss occurred for 'Gain' of 'esp324/Gain2'. The parameter's value cannot be represented exactly using the run-time data type. A small quantization error has occurred. To disable this warning or error, in the Configuration Parameters > Diagnostics > Data Validity pane, set the 'Detect precision loss' option in the Parameters group to 'none'.
Component:Simulink | Category:Block warning Suppress
host endian mode: Little
byte swapping required: false
External mode structural checksum received from target: [0xbf1add34, 0x1e26d68a, 0xfd2a8cad, 0xde767933].
target integer only code: false
target multiword chunk size: 4 bytes
action: EXT_CONNECT
External mode TARGET_CONNECT checksum test:
Host model structural checksum: [0xbf1add34, 0x1e26d68a, 0xfd2a8cad, 0xde767933].
Target model structural checksum: [0xbf1add34, 0x1e26d68a, 0xfd2a8cad, 0xde767933].
Downloading parameters for:
block : esp324/Gain2
Parameter name : Gain
Function of :
param : Gain
Data Type Trans: 0
Start index : 0
nEls: : 1
Data Type : [int16, 4]
Values:
20485
action: EXT_SETPARAM
Component:Simulink | Category:Model
Saving external mode simulation output as a single object is not supported because the workspace variable 'out' is not created during model code execution. To suppress the warning, set 'ReturnWorkspaceOutputs' to 'off'.
Component:Simulink | Category:Model warning
action: EXT_SELECT_SIGNALS
action: EXT_CANCEL_LOGGING
Got EXT_SETPARAM_RESPONSE from target with status OK.
Got EXT_SELECT_SIGNALS_RESPONSE from target for upInfoIdx 0 with status OK.
action: EXT_SELECT_TRIGGER
Got EXT_CANCEL_LOGGING_RESPONSE from target for upInfoIdx 1 with status OK.
action: EXT_DISCONNECT_REQUEST_NO_FINAL_UPLOAD
action: EXT_DISCONNECT_CONFIRMED
Component:Simulink | Category:Model
Error occurred while executing External Mode MEX-file 'ext_wifi_comm':
ExtTargetPktPending() call failed while checking for target pkt
Component:Simulink | Category:Block diagram error
Error occurred while executing External Mode MEX-file 'ext_wifi_comm':
ExtSetTargetPkt() call failed on CLOSE.
Ensure target is still running
Now I am using discrete no continuous states with auto step and treat each discrete rate as separate task
Is it possible to use ode3 with continuous blocks?
problem with wifi monitoring ESP32C3