Project

General

Profile

Forums » Req. WJ2(ESP32) support »

Microprocessor Frequency

Added by Costantino Piva about 1 month ago

Hello Everyone,
I'm using Waijung2 for ESP32 and since my micro has a frequency that ranges from 80 to 240MHz, I was wondering if is possible to see the frequency at which the microprocessor is working after I performed PIL simulation of my project.
Thank you in advance, best reguards.


Replies (4)

RE: Microprocessor Frequency - Added by Chandima Jayaneththi (จันทิมา) about 1 month ago

Hello Costantino,

The PIL Simulation report doesn't show the ESP32's clock frequency. It only shows code execution details such as execution time, MCU utilization, and other parameters related to code execution profiling.

Best regards,
Chandima.

clipboard-202406162134-cv7ya.png View clipboard-202406162134-cv7ya.png 70.1 KB

RE: Microprocessor Frequency - Added by Costantino Piva 12 days ago

Hello Chandima,
Sorry for the late reply. Thank you for your answer but I was wondering if is possible to set the Frequency at which the micro operates, since the datasheet sais it hase a range of operating frequencies (Paragraph 1. Overview).
Thank You

esp32-wroom-32_datasheet_en.pdf View esp32-wroom-32_datasheet_en.pdf 413 KB

RE: Microprocessor Frequency - Added by Chandima Jayaneththi (จันทิมา) 12 days ago

Hello Costantino,

Currently, there is no option in the Waijung 2 blockset to change the CPU clock frequency of ESP32. By default, the clock frequency is set to 160MHz. However, if you need to change it manually, you can do it by modifying the menuconfig parameters (sdkconfig) accordingly. We will consider adding an option to change the CPU clock frequency through the Waijung 2 blockset in future releases.

Thank you.

Best regards,
Chandima.

RE: Microprocessor Frequency - Added by Costantino Piva 10 days ago

Thank you so much for the answer, can't wait for this release then ;)

    (1-4/4)