FiO2 and aMG Labkit – Blinky demo

1 Overview

2. Software requirements

3. Power on the board and checking ST-Link connection

Note: after finish checking the ST-Link connection, ST-Link Utilities must be closed, to prevent connection error while Waijung run the Auto Compile and Download process during model build

4. Build and Run existing demo file (provided in Waijung packet)

The demo files for STM32F4 is located in the demo directory: waijungroot\targets\stm32f4_target\stm32f4\demo\
To run the existing demo for LED blinky, follow below steps:


Note: Waijung root and model file path mode not containing space or unicode (non-English) character.

5. Demo for Create new model