Project

General

Profile

Forums » Req. WJ2(ESP32) support »

How to config parameters in Project8 Control-led-from-webpage with esp-wroom-32 for 4 Mbyte Flash size

Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Refer to the example with this link https://waijung2-doc.aimagin.com/project-8-control-led-from-webpage.html
Hardware reference for this project is ESP32 DevKitC (16MB Flash, 8 MB RAM) but if I have esp-wroom-32 with integrates flash 4 MByte on-chip SRAM 512kByte. How to config parameters in Project8 Control-led-from-webpage.


Replies (4)

RE: How to config parameters in Project8 Control-led-from-webpage with esp-wroom-32 for 4 Mbyte Flash size - Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Hello Ajarn,

Could you please copy paste the entire error from diagnostic viewer into .txt file and attach it here?

RE: How to config parameters in Project8 Control-led-from-webpage with esp-wroom-32 for 4 Mbyte Flash size - Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Hello Ajarn,

We have looked at the error you are getting. For the problem you are facing, we will send you a patch file soon. That should fix your compilation error.

Thank you for your patience.

RE: How to config parameters in Project8 Control-led-from-webpage with esp-wroom-32 for 4 Mbyte Flash size - Added by Suphichaya Youngsubtargul (โอปอ) about 2 years ago

Okay sir, we will be waiting for the new patch.

    (1-4/4)